A mislabelled drum, a fume cupboard that no longer draws air or an unreviewed change to a reactor can each set off a fire, release or poisoning that halts operations and harms people. Experienced safety and laboratory staff are expected to spot these weaknesses before they matter and to argue convincingly for controls. Over five days you deepen that expertise using GHS classification, the 16-section safety data sheet, occupational exposure limits, control banding and the hierarchy of controls, applied to storage, segregation, transfer and waste.
Process safety sessions cover the elements of risk-based process safety, HAZOP facilitation, layers of protection analysis, bow-tie diagrams, management of change, permit to work and pre-startup safety reviews, with leading and lagging indicators drawn from API RP 754. Laboratory safety officers, process and chemical engineers, HSE advisers, plant supervisors, quality managers and inspectors in manufacturing, mining, water treatment, pharmaceuticals, agrochemicals and research institutions will find it relevant. Afterwards you can complete a defensible chemical risk assessment, chair a hazard review and audit a site against ISO 45001 expectations. Classroom, online and in-house formats are available, each leading to a CPD-accredited certificate.
Chemical incidents rarely come from a single failure. They follow a chain of small lapses: an outdated safety data sheet, incompatible materials stored side by side, a bypassed interlock, a modification nobody reviewed. Organisations in manufacturing, mining, utilities, healthcare and research increasingly need staff who can see the whole chain and who hold enough technical authority to stop work, challenge a design or rewrite a procedure.
The Professional Chemical Handling, Laboratory & Process Safety Training Course is aimed at practitioners who already know the basics and now carry responsibility for them. It moves from hazard communication and exposure assessment into laboratory controls such as fume cupboard performance, local exhaust ventilation, glove and respirator selection and chemical waste streams. It then addresses process hazards: reactive chemistry, flammable atmospheres and hazardous area classification, HAZOP, LOPA and bow-tie analysis, and safety instrumented functions and alarm management in outline. The final days deal with the management system that holds it all together, including change control, safe systems of work, contractor oversight, emergency preparedness, incident investigation and performance indicators aligned to ISO 45001.
Delivery mixes technical briefings with site-based case material. Participants review real-format safety data sheets, mark up a piping and instrumentation diagram during a mini HAZOP, investigate a simulated release and close the week with an improvement plan for their own laboratory or plant.
On completing the programme, participants will be able to:
Delegates finish the week holding:
Each session is anchored in plant and laboratory reality, through:
Day 1: Hazard Communication and Chemical Risk Assessment
Day 2: Laboratory Safety Systems
Day 3: Process Hazards and Hazard Analysis
Day 4: Barriers, Change and Safe Work
Day 5: Emergencies, Investigation and Performance
It suits practitioners who already work with hazardous chemicals and now carry wider responsibility, for example:
A CPD-accredited Certificate of Completion issued by Vision Reach Global Consultancy is awarded once a participant has attended every session and submitted the risk assessment, HAZOP worksheet and improvement plan set during the week.
The certificate confirms completed professional training; it is not a licence or statutory competence card, but it offers useful evidence of development for HSE appraisals.
Upcoming cohorts
CPD-Accredited
Official invoice & confirmation letter provided
Team discount for 3+ seats
Need help with this booking?
Our training team can help with group pricing, invoicing, or picking the right schedule.
Everything you need to know about this course before you register.
By the end of the Professional Chemical Handling, Laboratory & Process Safety programme, you'll be able to interpret ghs classifications and safety data sheets to set handling, storage and emergency controls, assess inhalation, skin and ingestion exposure using occupational exposure limits and control banding, specify and verify laboratory engineering controls, including fume cupboards and local exhaust ventilation, and identify reactive, flammable and toxic process hazards and the conditions that escalate them. The full breakdown of topics is covered session by session in the Course Outline tab above.
It suits practitioners who already work with hazardous chemicals and now carry wider responsibility, for example: Laboratory managers and laboratory safety officers, Process, chemical and production engineers, HSE managers and advisers in manufacturing and mining, Plant and shift supervisors in chemical, paint, fertiliser and agrochemical operations, Water and wastewater treatment plant managers, Quality and safety staff in pharmaceutical and food processing plants, Occupational health and hygiene practitioners, University and research laboratory technicians and principal investigators, and Regulatory inspectors and insurance risk surveyors.
Professional Chemical Handling, Laboratory & Process Safety Training Course typically runs as 5 Days. It's available as in-person classroom, live virtual, and in-house corporate training — every course can also be delivered on-site for your team on dates that suit you.
Professional Chemical Handling, Laboratory & Process Safety Training Course is scheduled in-classroom in Nairobi, Kenya, Mombasa, Kenya, Naivasha, Kenya, and Kisumu, Kenya, and 14 other locations, plus a live interactive virtual classroom you can join from anywhere. Check the schedule panel above for exact upcoming dates and fees in each location.
The next live virtual cohort of Professional Chemical Handling, Laboratory & Process Safety starts October 19, 2026, with new classroom cohorts also running on a rolling basis. Pick a date and location in the schedule panel above, then click "Register for the Course" — it takes a few minutes and your seat is confirmed once payment or a signed purchase order is received.
Yes — delegates who meet the attendance requirement receive a Certificate of Completion for Professional Chemical Handling, Laboratory & Process Safety Training Course from Vision Reach Global Consultancy, issued in the name you register with, so double-check the spelling at checkout.
Professional Chemical Handling, Laboratory & Process Safety Training Course is pitched at intermediate professionals. If you're unsure whether it's the right fit for your current role or background, message our training advisors before you register and they'll help you confirm.
Fees for Professional Chemical Handling, Laboratory & Process Safety Training Course vary by delivery location and format and are shown in real time in the schedule panel above once you pick a date. Register 3 or more delegates on the same course together and a 5% team discount is applied automatically — larger cohorts can request a custom corporate quote.
Yes — Professional Chemical Handling, Laboratory & Process Safety Training Course can be delivered on-site at your offices (or virtually for distributed teams), with case studies and examples tailored to your industry and the specific challenges your team is working through. Switch to the "In-House" tab in the schedule panel above to request a proposal.
Related Training
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 110,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Swipe to see more courses →
VRG brings strategic discipline to complex organizational challenges. Their approach is structured, data-driven, and outcome-focused.
Levis Wabwire
Managing Director
They facilitated our strategy review, we improved departmental KPI alignment by 35% and reduced operational bottlenecks significantly.
David Oketch
Strategy Lead
Employee engagement scores increased following the leadership training program. The difference in accountability culture is evident.
Wendy Albright
Program Manager