Hazardous substances are present in factories, treatment works, hospitals, schools, research institutes and fuel depots, and the consequences of poor control reach workers, neighbours and the environment. Regulators and insurers increasingly ask not only whether a safety system exists but whether the organisation can prove that it works. Evidence comes from monitoring, measurement and honest evaluation of results.

The Monitoring and Evaluation of Chemical Handling, Laboratory and Process Safety Training Course links technical safety controls to the systems that check them. Participants review how chemical hazards are identified and communicated, how laboratory and process risks are controlled, and how each control can be inspected, measured and audited. They then study performance indicators, data collection, trend analysis and management review, together with incident investigation and corrective action tracking.

Instruction is practical and site oriented, with checklists and templates that participants can take back to their workplaces. Participants inspect a simulated chemical store and laboratory, draft indicators from realistic scenarios, analyse incident data and finish by assembling a monitoring plan that fits their own operations and available resources.

By the end of the course, participants will be able to:

• Evaluate chemical inventories, labelling, SDS availability and storage arrangements.
• Assess laboratory controls such as ventilation, waste handling and emergency equipment.
• Explain the main elements of a process safety management system.
• Select leading and lagging indicators that show whether controls are working.
• Plan and conduct inspections and audits using structured checklists.
• Investigate near misses and incidents and identify root causes.
• Track corrective actions and report safety performance to management.

The course serves professionals who work with, supervise or assess hazardous chemicals and processes, including:

• HSE officers and safety advisers
• Laboratory managers and technicians
• Process engineers and plant supervisors
• Chemical store and warehouse managers
• Environmental compliance officers
• Internal auditors and third-party inspectors
• Water and wastewater treatment operators
• Quality assurance and university laboratory safety staff

Participants leave with:

• A chemical store and laboratory inspection checklist ready for field use.
• A set of leading and lagging indicators matched to their operation.
• An audit protocol for process safety elements.
• A root cause worksheet for incident and near miss analysis.
• A corrective action register with clear follow-up rules.
• A draft monitoring plan and a management report outline.

Learning is site oriented, with emphasis on observation and evidence. Methods include:

• Facilitated briefings on hazards, controls and measurement
• Simulated inspection of a chemical store and teaching laboratory
• Process safety case files with documents to audit
• Syndicate work designing indicators and audit protocols
• Incident analysis workshops using anonymised event data

Participants who attend each session and complete the inspection and audit exercises are issued with a CPD-accredited Certificate of Completion by Vision Reach Global Consultancy.