Chemical releases, laboratory fires and process upsets rarely come from a single failure. They build up when inspections lapse, procedures drift and warning signs are not measured. Organisations that monitor their controls systematically find weaknesses before they become injuries, environmental damage or regulatory action. Five days show how to build that monitoring and evaluation discipline.
Topics include chemical inventory and hazard communication, safety data sheets, GHS labelling, storage compatibility, exposure monitoring, laboratory risk assessment, fume cupboard and waste checks, and permit-to-work controls. Process safety content covers hazard identification, layers of protection, management of change, mechanical integrity, emergency response and the OSHA PSM elements. You will design leading and lagging indicators, inspection checklists and audit protocols, analyse near misses with root cause methods and report results to management. HSE officers, laboratory managers, plant and process supervisors, chemical store managers, environmental officers, auditors and inspectors from manufacturing, water treatment, mining, oil and gas and university settings will gain most. Delivery is classroom, online or in-house. Afterwards you can set up a monitoring programme, carry out a structured inspection and present improvement priorities with supporting evidence.
Hazardous substances are present in factories, treatment works, hospitals, schools, research institutes and fuel depots, and the consequences of poor control reach workers, neighbours and the environment. Regulators and insurers increasingly ask not only whether a safety system exists but whether the organisation can prove that it works. Evidence comes from monitoring, measurement and honest evaluation of results.
The Monitoring and Evaluation of Chemical Handling, Laboratory and Process Safety Training Course links technical safety controls to the systems that check them. Participants review how chemical hazards are identified and communicated, how laboratory and process risks are controlled, and how each control can be inspected, measured and audited. They then study performance indicators, data collection, trend analysis and management review, together with incident investigation and corrective action tracking.
Instruction is practical and site oriented, with checklists and templates that participants can take back to their workplaces. Participants inspect a simulated chemical store and laboratory, draft indicators from realistic scenarios, analyse incident data and finish by assembling a monitoring plan that fits their own operations and available resources.
By the end of the course, participants will be able to:
Participants leave with:
Learning is site oriented, with emphasis on observation and evidence. Methods include:
Day 1: Chemical Hazards and Control Systems
Day 2: Laboratory Safety Monitoring
Day 3: Process Safety Management Elements
Day 4: Indicators, Audits and Data Analysis
Day 5: Incident Learning and Continuous Improvement
The course serves professionals who work with, supervise or assess hazardous chemicals and processes, including:
Participants who attend each session and complete the inspection and audit exercises are issued with a CPD-accredited Certificate of Completion by Vision Reach Global Consultancy.
Upcoming cohorts
CPD-Accredited
Official invoice & confirmation letter provided
Team discount for 3+ seats
Need help with this booking?
Our training team can help with group pricing, invoicing, or picking the right schedule.
Everything you need to know about this course before you register.
By the end of the Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety programme, you'll be able to evaluate chemical inventories, labelling, sds availability and storage arrangements, assess laboratory controls such as ventilation, waste handling and emergency equipment, explain the main elements of a process safety management system, and select leading and lagging indicators that show whether controls are working. The full breakdown of topics is covered session by session in the Course Outline tab above.
The course serves professionals who work with, supervise or assess hazardous chemicals and processes, including: HSE officers and safety advisers, Laboratory managers and technicians, Process engineers and plant supervisors, Chemical store and warehouse managers, Environmental compliance officers, Internal auditors and third-party inspectors, Water and wastewater treatment operators, and Quality assurance and university laboratory safety staff.
Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course typically runs as 5 Days. It's available as in-person classroom, live virtual, and in-house corporate training — every course can also be delivered on-site for your team on dates that suit you.
Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course is scheduled in-classroom in Nairobi, Kenya, Mombasa, Kenya, Naivasha, Kenya, and Kisumu, Kenya, and 14 other locations, plus a live interactive virtual classroom you can join from anywhere. Check the schedule panel above for exact upcoming dates and fees in each location.
The next live virtual cohort of Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety starts October 26, 2026, with new classroom cohorts also running on a rolling basis. Pick a date and location in the schedule panel above, then click "Register for the Course" — it takes a few minutes and your seat is confirmed once payment or a signed purchase order is received.
Yes — delegates who meet the attendance requirement receive a Certificate of Completion for Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course from Vision Reach Global Consultancy, issued in the name you register with, so double-check the spelling at checkout.
Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course is pitched at intermediate professionals. If you're unsure whether it's the right fit for your current role or background, message our training advisors before you register and they'll help you confirm.
Fees for Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course vary by delivery location and format and are shown in real time in the schedule panel above once you pick a date. Register 3 or more delegates on the same course together and a 5% team discount is applied automatically — larger cohorts can request a custom corporate quote.
Yes — Monitoring and Evaluation of Chemical Handling, Laboratory & Process Safety Training Course can be delivered on-site at your offices (or virtually for distributed teams), with case studies and examples tailored to your industry and the specific challenges your team is working through. Switch to the "In-House" tab in the schedule panel above to request a proposal.
Related Training
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 110,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Swipe to see more courses →
VRG brings strategic discipline to complex organizational challenges. Their approach is structured, data-driven, and outcome-focused.
Levis Wabwire
Managing Director
They facilitated our strategy review, we improved departmental KPI alignment by 35% and reduced operational bottlenecks significantly.
David Oketch
Strategy Lead
Employee engagement scores increased following the leadership training program. The difference in accountability culture is evident.
Wendy Albright
Program Manager