Most serious chemical incidents trace back to ordinary lapses: an unlabelled container, a skipped permit, a changed procedure nobody reviewed, a supervisor who looked away. Preventing them is a leadership task as much as a technical one. Managers set the tone for how hazards are reported, how rules are enforced and how quickly weak controls are fixed.
This five-day programme equips supervisors and managers to lead safe operations in plants, stores and laboratories. You study hazard identification, GHS classification and labelling, safety data sheets, storage and segregation, personal protective equipment, fume cupboards and ventilation, waste handling, emergency and spill response, and the basics of process safety including HAZOP, layers of protection, permit to work, management of change and mechanical integrity. Sessions also address safety culture, behavioural observation, incident investigation and leading and lagging performance indicators. It suits laboratory managers, plant and production supervisors, HSE officers, quality managers, warehouse and logistics leaders in chemical, manufacturing, water treatment, mining and health settings. Delivery is classroom, online or in-house, with a CPD-accredited certificate. Afterwards you can audit a work area, coach your team on safer routines and report performance to executives with credible measures.
Facilities that use solvents, acids, gases, reagents and process chemicals carry risks to people, property and the environment that rule-books alone do not control. Fires, toxic releases, exposures and contamination incidents continue to occur where hazards are poorly understood, controls decay over time, or leaders fail to follow up on near misses. Strong leadership is the link between the written system and what happens on the floor.
The Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course combines technical grounding with practical management skills. Participants start with chemical hazards and regulatory classification, then move through laboratory and warehouse practice, process safety fundamentals, emergency preparedness and incident learning. A parallel thread develops the leadership behaviours that sustain performance: setting expectations, coaching, communicating risk, and holding people and contractors accountable.
Sessions rely on realistic scenarios, inspection exercises and simplified process safety studies. Participants build their own safety improvement plan, with a prioritised list of hazards, owners and performance measures, to apply on return to work. Facilitators encourage open discussion of near misses so that learning comes from real experience.
By the end of the course, participants will be able to:
Participants leave the programme with:
Learning moves between technical content and management practice through:
Day 1: Chemical Hazards and Safety Leadership
Day 2: Safe Handling, Storage and Waste
Day 3: Laboratory Safety Management
Day 4: Process Safety Fundamentals
Day 5: Emergency Response, Learning and Performance
The course is aimed at people who manage or supervise work with hazardous substances, such as:
Attendance at all sessions and completion of the practical exercises earns a CPD-accredited Certificate of Completion, issued by Vision Reach Global Consultancy.
Upcoming cohorts
CPD-Accredited
Official invoice & confirmation letter provided
Team discount for 3+ seats
Need help with this booking?
Our training team can help with group pricing, invoicing, or picking the right schedule.
Everything you need to know about this course before you register.
By the end of the Leadership and Performance in Chemical Handling, Laboratory & Process Safety programme, you'll be able to identify chemical, physical and process hazards and rank the associated risks, apply ghs classification, labelling and safety data sheet information in daily operations, specify safe storage, segregation, transfer and waste handling arrangements, and organise laboratory practices that control exposure, contamination and ignition sources. The full breakdown of topics is covered session by session in the Course Outline tab above.
The course is aimed at people who manage or supervise work with hazardous substances, such as: Laboratory managers and senior analysts, Plant, production and shift supervisors, HSE officers and safety coordinators, Quality assurance and compliance managers, Warehouse, store and logistics leaders handling chemicals, Water treatment and environmental monitoring managers, Maintenance and engineering managers, and Mining, manufacturing and healthcare facility managers.
Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course typically runs as 5 Days. It's available as in-person classroom, live virtual, and in-house corporate training — every course can also be delivered on-site for your team on dates that suit you.
Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course is scheduled in-classroom in Nairobi, Kenya, Mombasa, Kenya, Naivasha, Kenya, and Kisumu, Kenya, and 14 other locations, plus a live interactive virtual classroom you can join from anywhere. Check the schedule panel above for exact upcoming dates and fees in each location.
The next live virtual cohort of Leadership and Performance in Chemical Handling, Laboratory & Process Safety starts October 19, 2026, with new classroom cohorts also running on a rolling basis. Pick a date and location in the schedule panel above, then click "Register for the Course" — it takes a few minutes and your seat is confirmed once payment or a signed purchase order is received.
Yes — delegates who meet the attendance requirement receive a Certificate of Completion for Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course from Vision Reach Global Consultancy, issued in the name you register with, so double-check the spelling at checkout.
Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course is pitched at advanced professionals. If you're unsure whether it's the right fit for your current role or background, message our training advisors before you register and they'll help you confirm.
Fees for Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course vary by delivery location and format and are shown in real time in the schedule panel above once you pick a date. Register 3 or more delegates on the same course together and a 5% team discount is applied automatically — larger cohorts can request a custom corporate quote.
Yes — Leadership and Performance in Chemical Handling, Laboratory & Process Safety Training Course can be delivered on-site at your offices (or virtually for distributed teams), with case studies and examples tailored to your industry and the specific challenges your team is working through. Switch to the "In-House" tab in the schedule panel above to request a proposal.
Related Training
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 110,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Swipe to see more courses →
VRG brings strategic discipline to complex organizational challenges. Their approach is structured, data-driven, and outcome-focused.
Levis Wabwire
Managing Director
They facilitated our strategy review, we improved departmental KPI alignment by 35% and reduced operational bottlenecks significantly.
David Oketch
Strategy Lead
Employee engagement scores increased following the leadership training program. The difference in accountability culture is evident.
Wendy Albright
Program Manager