A mislabelled drum, an incompatible storage shelf or a bypassed interlock is often all it takes to turn routine work into a fire, toxic release or chronic health problem. Five days give laboratory, plant and safety staff the habits and tools to prevent that. You learn to classify hazards, read safety data sheets and GHS labels, and select controls using the hierarchy from elimination through ventilation and engineering measures to personal protective equipment. Storage and handling sessions cover segregation, bunding, transfer, spill response and waste disposal.
The programme extends from the bench to the plant. Participants practise laboratory risk assessment, fume cupboard and gas cylinder safety, and then meet process safety concepts such as hazard identification, HAZOP, layers of protection, management of change, permit to work, containment and emergency planning. Delivery is in the classroom, online or in-house, with site-specific scenarios on request. Laboratory managers, chemists, process operators, HSE officers, supervisors and environmental compliance staff will gain directly usable skills. Afterwards you can audit a chemical store, run a task risk assessment and draft emergency procedures, and you receive a CPD-accredited certificate.
Chemicals are present in far more workplaces than most people realise: water treatment plants, hospitals, universities, factories, fuel depots, farms and cleaning contractors all hold substances that can burn, poison, corrode or react violently. Most incidents are traced back to ordinary failures such as poor labelling, unclear procedures, inadequate training and equipment left in poor repair, rather than to exotic hazards.
The Best Practices in Chemical Handling, Laboratory & Process Safety Training Course builds safe practice from the container upward. It opens with chemical hazard classes, toxicology basics and exposure limits, then moves to the practical routines of purchasing, receiving, storing, dispensing, transporting and disposing of chemicals. A laboratory module deals with design, ventilation, glassware, biological and chemical waste, and emergency equipment. The final sessions introduce process safety management, including how plants identify scenarios, protect against loss of containment, control changes and investigate near misses.
Teaching is highly practical. Participants inspect photographs and layouts of real stores and laboratories, rehearse spill and exposure responses, and work through a simplified HAZOP. They return to work with checklists, a risk assessment and a prioritised list of improvements for their own facility.
By the end of the course, participants will be able to:
Participants return to their workplaces with:
The training favours demonstration and rehearsal over lecture. Delegates experience:
Day 1: Chemical Hazards and Regulatory Foundations
Day 2: Safe Handling, Storage and Disposal
Day 3: Laboratory Safety Practice
Day 4: Emergency Preparedness and Response
Day 5: Introduction to Process Safety Management
The course is relevant to anyone who works with, supervises or regulates hazardous substances, including:
Participants who attend the sessions and take part in the practical drills and exercises receive a CPD-accredited Certificate of Completion issued by Vision Reach Global Consultancy. The certificate evidences training received and is not a statutory competence licence.
Upcoming cohorts
CPD-Accredited
Official invoice & confirmation letter provided
Team discount for 3+ seats
Need help with this booking?
Our training team can help with group pricing, invoicing, or picking the right schedule.
Everything you need to know about this course before you register.
By the end of the Best Practices in Chemical Handling, Laboratory & Process Safety programme, you'll be able to classify chemical hazards and interpret safety data sheets and ghs labelling, assess exposure risks and select controls following the hierarchy of control, store, segregate, transfer and dispose of chemicals and chemical waste correctly, and apply safe working practices in laboratories, including fume cupboards, glassware and compressed gases. The full breakdown of topics is covered session by session in the Course Outline tab above.
The course is relevant to anyone who works with, supervises or regulates hazardous substances, including: Laboratory managers, chemists and technicians, Process operators and plant supervisors, HSE officers and safety advisers, Environmental compliance and waste management officers, Stores and warehouse staff handling chemicals, Water and wastewater treatment plant staff, Quality control and research staff in manufacturing, mining and food processing, University and hospital laboratory personnel, and Fire and emergency response coordinators.
Best Practices in Chemical Handling, Laboratory & Process Safety Training Course typically runs as 5 Days. It's available as in-person classroom, live virtual, and in-house corporate training — every course can also be delivered on-site for your team on dates that suit you.
Best Practices in Chemical Handling, Laboratory & Process Safety Training Course is scheduled in-classroom in Nairobi, Kenya, Mombasa, Kenya, Naivasha, Kenya, and Kisumu, Kenya, and 14 other locations, plus a live interactive virtual classroom you can join from anywhere. Check the schedule panel above for exact upcoming dates and fees in each location.
The next live virtual cohort of Best Practices in Chemical Handling, Laboratory & Process Safety starts October 12, 2026, with new classroom cohorts also running on a rolling basis. Pick a date and location in the schedule panel above, then click "Register for the Course" — it takes a few minutes and your seat is confirmed once payment or a signed purchase order is received.
Yes — delegates who meet the attendance requirement receive a Certificate of Completion for Best Practices in Chemical Handling, Laboratory & Process Safety Training Course from Vision Reach Global Consultancy, issued in the name you register with, so double-check the spelling at checkout.
Best Practices in Chemical Handling, Laboratory & Process Safety Training Course is pitched at intermediate professionals. If you're unsure whether it's the right fit for your current role or background, message our training advisors before you register and they'll help you confirm.
Fees for Best Practices in Chemical Handling, Laboratory & Process Safety Training Course vary by delivery location and format and are shown in real time in the schedule panel above once you pick a date. Register 3 or more delegates on the same course together and a 5% team discount is applied automatically — larger cohorts can request a custom corporate quote.
Yes — Best Practices in Chemical Handling, Laboratory & Process Safety Training Course can be delivered on-site at your offices (or virtually for distributed teams), with case studies and examples tailored to your industry and the specific challenges your team is working through. Switch to the "In-House" tab in the schedule panel above to request a proposal.
Related Training
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 110,000
Key Skills You'll Learn
Vision Reach Global
From $1,500 · KSh 115,000
Swipe to see more courses →
VRG brings strategic discipline to complex organizational challenges. Their approach is structured, data-driven, and outcome-focused.
Levis Wabwire
Managing Director
They facilitated our strategy review, we improved departmental KPI alignment by 35% and reduced operational bottlenecks significantly.
David Oketch
Strategy Lead
Employee engagement scores increased following the leadership training program. The difference in accountability culture is evident.
Wendy Albright
Program Manager